OPVs

Organic photovoltaic cells

OPVs

Improve the efficiency of your solar cells thanks to our solutions! We offer process tools for coating and encapsulation, integration of characterization tools under inert atmosphere.

Controlling the small molecular weight organic precursors is one of the key functions for Perovskites application. The unique evaporation tool with low temperature sources, temperature-controlled chamber surfaces and defined “shift” of operating regime allow a controlled process. This provides a higher repeatability too.

Show more

Laminar flow

MBRAUN is one of the few companies to achieve an ISO Class 2 cleanroom standard and O2 and H2O <1 ppm

  • Cleaner atmosphere
  • Minimized particulate load
  • Increased overall yield for the entire manufacturing process
  • Longer lifetime for devices
  • Better efficiency (OLED, OPV, Perovskite, thin-film batteries)

Large enclosures

Engineers at MBRAUN have in depth experience in designing and manufacturing complete solutions while helping to improve overall productivity. For example, larger more complex gloveboxes and custom enclosures are usually integrated into industrial production lines while smaller more conventional units are used for research and development.

No matter what volume

IGMSpro

  • Demanding and/or large enclosure volume
  • Dedicated to industrial application
  • Interface to customer control system
  • Modular construction
  • Solvent trap
  • Up to 220m³ enclosure volume

Humidifier

The MBRAUN glovebox humidifier is designed to provide an adjustable level (5-70%) of moisture for the connected equipment (usually a glovebox). The device acts as a generator of humidified gas and has its own circulation blower which provides a gas flow for the intermix of moist gas and the containment atmosphere. The principle of operation is based on evaporation of water droplets into a gas stream. Additional features are available for the direct humidifying of the filter or for dehumidification (purging or drying by filter)

Ovens

MBRAUN glovebox systems can be optionally equipped with ovens    for the removal of water or to cure sensitive materials under controlled conditions.

All oven  systems from MBRAUN have been specifically designed for being integrated into inert environments and are also available as standalone units. Please choose from the following oven products offered at MBRAUN.

Spin coaters

Several possibilities are available from standard spin coaters to fully integrated solutions with dispensers

Hot plates

MBRAUN glovebox systems can be optionally equipped with  hotplates either for the removal of water and/or solvents from substrate surfaces or to cure sensitive materials under controlled conditions.

All  hotplate systems from MBRAUN have been specifically designed for being integrated into inert environments and are also available as standalone units. Please choose from the following  hotplate products offered at MBRAUN.

Encapsulation - Sealing of sensitive devices

MBRAUN has developed and adapted a series of process tools that enable customers to fully seal their devices and prepare them to be taken out of the inert environment in order to run lifetime or efficiency tests.

UV Clean - Preparation of substrates

The solution developed by MBRAUN is a system for UV ozone cleaning of semiconductor and optical surfaces and is widely used in the electronic and semiconductor industries as well as in scientific research fields including biology, chemistry, physics and materials science. The process provides a clean, hydrocarbon-free optical surface with significantly improved thin film and UV resin adhesion characteristics.


© 2022 MBRAUN. All Rights Reserved.