Inert Gas Purifiers
The purpose of the MBRAUN gas purification system, together with a glovebox is for the enabling and maintaining of a pure inert gas atmosphere inside a hermetically sealed enclosure. We propose a wide range of gas purification system to remove O2 and H2O, but not only. Inert atmosphere is important, but a clean atmosphere too. We can remove solvent vapors, dust and hazardous particles, i.e. for Additive Manufacturing (3D Printing, LMD).
MB-RGG Regeneration Gas Generator
ON-SITE HYDROGEN GENERATION SAFE, SMART AND ON DEMAND
- Independent gas supply: Standalone device for regeneration gas
- Seamless retrofitting: Compatible with EASYlabs, LABstars, UNIlabs & LABmasters
- Flexible mixtures: Produces equivalents to Ar/H2 or N2/H2 (95%/5%)
- Efficient & cost-effective: Reduces dependence on premixed gas cylinders
- Process control: Ensures consistent and reliable availability of regeneration gas
- Automated operation: 24 V connection enables automatic start/stop depending on glovebox requirements
- Safe operation: Regeneration gas is only generated when needed (no storage)
Details
Generate hydrogen exactly when and where you need it - directly at your glovebox. The gas is produced locally and consumed immediately, eliminating storage risks and cylinder logistics.
With our Quick Connection options, the generator integrates effortlessly into new or existing gloveboxes and starts automatically during regeneration.
Enjoy a cost-effective, low-maintenance and safe solution – with hydrogen levels always below explosive limits and optimized gas flow for maximum efficiency.
- Enhanced safety with reduced operational risk
- Lower operating and administrative costs
- Mobile solution – connection to various MBRAUN systems
- Independent from external gas supply
- Connection kit for your new or existing system
HP gas purifiers
- Pre-purification of an in-house gas supply
- Dry gas supply (inert gas) for purge boxes
- Ideal to pre-purify gas when multiple gloveboxes are used
Clean Dry Air (CDA)
MBRAUN developed a series of gas purification systems specifically dedicated to the dehumidification of clean process air. Compared to other MBRAUN purifier models which remove oxygen too, the CDA units are entirely focused on moisture removal.
- Very high H2O capacity
- Very compact, space saving design
- Very low energy consumption
- Low operating costs
- No requirement for regeneration gases
- No influence of the regional climate changes
Humidifier
The MBRAUN glovebox humidifier is designed to provide an adjustable level (5-70%) of moisture for the connected equipment (usually a glovebox). The device acts as a generator of humidified gas and has its own circulation blower which provides a gas flow for the intermix of moist gas and the containment atmosphere. The principle of operation is based on evaporation of water droplets into a gas stream. Additional features are available for the direct humidifying of the filter or for dehumidification (purging or drying by filter)
Tritium Retention Systems (TRS)
Tritium Retention Systems (TRS) convert tritiated chemical species (principally elemental, oxide and hydrocarbon) in the process stream to the oxide form (HTO) and remove the tritiated water by adsorption on molecular sieve beds.
- Tritium Oxidizing System
- Water Capturing System
- Worldwide Operating Capability Through Use of Standardized Power Supply
- Incorporates High-vacuum Feedthroughs
